Chứng nhận Quốc tế
Chứng nhận chất lượng cho sản phẩm sân chơi. 


1/ Tiêu chuẩn an toàn đồ chơi trẻ em của Mỹ: ASTM F963 và EN71 của Châu âu ; 
2/ Tiêu chuẩn an toàn về  sản xuất, lắp đặt, thử nghiệm, vận hành và bảo trì thiết bị sân chơi của Mỹ ASTM F1487
Public playgrounds provide children with a communal, carefree environment. It’s not only ideal but implied that all playground equipment remains safe. Unfortunately, according to the U.S. Consumer Product Safety Commission (CPSC), there are over 200,000 annual injuries on public playgrounds. And this only includes injuries that resulted in trips to the emergency room. The most common contribution to these injuries, accounting for three-fourths of the unwanted circumstances, is falls. Additional hazards derive from impact by swings, crush or shear points, contact with protrusions, and sharp edges. ASTM F1487-21: Standard Consumer Safety Performance Specification for Playground Equipment for Public Use exists to limit the likelihood of these life-threatening or debilitating injuries. About ASTM F1487-21 ASTM F1487-21 is a performance specification that addresses safety and performance standards for various types of public playground equipment. Specifically, the document encompasses equipment for the 5th percentile 2-year-old through the 95th percentile 12-year-old range. It does not include site furnishings, such as benches, tables, and other structures, installed outside of the equipment zone use. To limit the possibility of falls on public playground equipment, ASTM F1487-21 sets forth several stipulations. A major part of this is installing handrails, guardrails, and barriers on different surfaces, including stairways, ramps, stepladders, and platforms. By including these and their recommended dimensions, the standard specification helps obstruct the means by which falls can occur. The document also includes guidance on the design of ramps and accessible openings.

Read more at the ANSI Blog: ASTM F1487-21: Playground Equipment for Public Use Standard
3/ Tiêu chuẩn an toàn về lắp đặt, sản xuất và vận hành thiết bị sân chơi của Châu âu: EN1176
This document establishes requirements on the installation, inspection, maintenance and operation of playground equipment and surfacing around the equipment. It is intended for use by playground operators (see definitions 3.4) to assist them in developing an inspection and maintenance regime for each playground.
The Standard (EN 1176) is published in seven parts:
Part 1: General safety requirements and test methods
Part 2: Additional specific safety requirements and test methods for swings
Part 3: Additional specific safety requirements and test methods for slides
Part 4: Additional specific safety requirements and test methods for runways
Part 5: Additional specific safety requirements and test methods for carousels
Part 6: Additional specific safety requirements and test methods for rocking equipment
Part 7: Guidance for installation, inspection, maintenance and operation
Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
Part 11: Additional specific safety requirements and test methods for spatial networks.

EN 1176 is a safety standard made in Europe for both indoor and outdoor playgrounds. It might not be as specialized as ASTM1918-12 for indoor playgrounds, but it is also used and referred as one of the main international standards for indoor playgrounds.The materials used in our indoor playgrounds have been tested and certified to the EN1176 standard. All playgrounds we built in Europe have past the inspections by their local safety authorities, including the safety inspection in Holland and Norway, which are known as the most strict playground inspections among all European countries.

4/ Tiêu chuẩn thiết kế, sản xuất và vận hành thiết bị thể dục thể thao của châu âu: EN16630:2015

This European standard specifies general safety requirements for the manufacture, installation, inspection and maintenance of permanently installed, freely accessible outdoor fitness equipment. This standard does not cover electrically driven equipment, functional training facilities (typically with unrestrained weights) nor military style obstacle courses.
The equipment is intended for youths and adults or users having an overall height greater than 1 400 mm to promote fitness by using the equipment to exercise. Equipment covered by this standard is not playground equipment for children (EN 1176 series), indoor stationary training equipment (EN 957 series) or free access multi-sports equipment (EN 15312) even if it meets the requirements of each of these standards.
NOTE    In this standard "permanently installed outdoor fitness equipment" is simply called "fitness equipment".
5. Tiêu chuẩn cho thiết bị chơi nước của Châu âu-  EN 17232:2020 - Water play equipment and features - Safety requirements, test methods and operational requirements
This document specifies safety requirements, test methods and operational requirements for water play equipment, features and structures:
- intended for playing, and
- in areas intended for water activities for public use (non-domestic), typically in swimming pool facilities, and
- where water is an integral part in the use of the play equipment/feature/structures.
This document also applies for spray parks.
This document does not apply to:
a)   floating leisure articles according to EN ISO 25649 series;
b)   artificial climbing walls according to EN 12572 series;
c)   toys according to EN 71 series;
d)   water slides according to EN 1069 series;
e)   climbing/bouldering walls used in the swimming pool surround according to EN 17164;
f)   water equipment/features (e.g. ornamental fountains) not intended for playing;
g)   water play equipment/features installed in swimming pools for domestic use.
h)   playground equipment according to EN 1176 series.

^ Về đầu trang